Home > Farm And Ranch Supplies > Automatic Horse Feeders > Horse Feeders - Solar Powered

Horse Feeders


Horse Feeders - Solar Powered - Click to enlarge
Horse Feeders - Solar Powered - Click to enlarge
Horse Feeders - Solar Powered
Item# QFD-QFSBSC
$409.99
Shipping: 
Availability: Usually ships the next business day

Horse Feeders

  • Holds 50 lbs of Feed

    Solar Powered Automatic Feeder - QFSBSC
    For no power, unreliable power applications. Operate your Quick Feed from our normal life 12-volt battery with solar charger. The solar charger keep the battery charged at all times without overcharging. The solar charger comes with an 8' cord.

    Automatic animal feeder for livestock and other pets holds 50 lb. pellets or grain, 25 lb. dog/cat food. Dispenses 1 to 12 times per day, 1 to 5 cups each feed time. Comes complete with built in programmable timer, 2-AA batteries for memory back-up, snap lock lid, 2"PVC pipe and fittings, mounting screws, instruction manual, 12-volt transformer, battery adapter a normal life dry cell 12-volt battery and solar charger. Dimensions: 28" x 16" x 9" - 9 lbs.

  • Wall mount storage hopper, stores then pours any dry material. Dispenses charcoal, dog food, cat food, pellets, grain, rock salt, bird seed, and many other dry materials. Made of high density polyethylene. This auto pet or Wall Mounted Feeder or our ever popular equine ontime Automatic Horse Feeders comes complete with lid, manual pour lever, large measuring cup and mounting screws.

    Horse Feeders

    Hanging Instructions

    Equine Automatic Feeders must be mounted within a safe, dry, covered area. DO NOT attempt to make modifications or changes to this product or warranty may be nullified and voided.

    INSTALLATION: Locate your new cat,pig,horse or equine feeder close to a 110-volt receptacle for electric power. Mount feeder on a suitable outer stall wall OUT OF THE ANIMALS REACH for horses and other grain fed animals. See Figures A, B or C for mounting applications for your animal or pet. Note: Wall must be solid and sturdy.

    Determine a mounting height that allows the PVC pipe to be directed back through the stall wall into the feed bucket as in Figure A (feed bucket height may need to be lowered to accommodate ease in refilling the QUICK FEED hopper). For domestic pets, install feeder according to Figures A, B or C.

    For all applications locate top center mounting hole on back of hopper and mark wall. Install screw, hang feeder on single screw, level unit and mark remaining 3 mounting holes. Install all 4 screws using washers; tighten screws firmly.

    Figure A - Typical Outer Stall Installation: Slip PVC 45° ell (do not glue) over the spout adapter. Determine where the PVC pipe will penetrate the stall wall and mark. Cut hole through stall wall . Insert PVC through hole and into PVC 45° ell. Mark and cut off excess PVC pipe to correct length. CAUTION: Do not leave PVC pipe protruding inside stall or feed bucket where the animal can reach it. Cut flush with inside wall.

    Figures B & C

    Figures B & C - Direct Drop Installation: After hanging feeder slip coupler over spout adapter. Determine length for PVC pipe and cut to size. Slip PVC 45 ell over end if desired, slip pipe into coupler.

    Ships Next Day On Horse Feeders

    • Accessories